Enhanced/Dual Powered

Willem EPROM Programmer

User Guide  

 

Willem Package Item Image

Supported IC List

Installation & Configuration

Jumper Configuraton

Self Test Function

Software Interface

FLASH Chip Programming

EPROM Chip Programming

EEPROM Chip Programming

ATMEL Chip Programming

PIC Chip Programming

AVR Chip Programming

ATMEL AT89 Adapter

ATMEL PLCC44 Adapter

TSOP48 Adapter

 

Willem Package Item Image  

Main Board / Cables

Main Board PCB3.5

support pregnancy school

 

Main Board PCB4E

support pregnancy school

 

Main Board PCB5.0

support pregnancy school

 

Main Board PCB5.5C

support pregnancy school

 

Parallel Data Cable (Printer extension cable, with male-female 25 pin connector, and pin to pin through)

A-A type USB cable(for power)

support pregnancy school

support pregnancy school

                                

          

Optional Items:

ATMEL 89 Adapter

ATMEL PLCC 44 Adapter

TSOP 48 Adapter

support pregnancy school

support pregnancy school

support pregnancy school

FWH/HUB PLCC32Adapter

PLCC32 Adapter

SOIC Adapter(Simplified)

On-Board

On-Board

support pregnancy school

AC or DC Power Adapter (9V or 12V, 200mA)

SOIC Adapter(Professional)

 

support pregnancy school

support pregnancy school

 

 

Supported Device List

Support Pregnancy School !exclusive! <90% OFFICIAL>

From bump to baby, a little preparation goes a long way.

Disclaimer: I am not a medical professional. This post is based on personal experience and general research. Always consult with your OB/GYN or midwife regarding your specific pregnancy health. support pregnancy school

And confidence is the best thing you can pack in your hospital bag. From bump to baby, a little preparation goes a long way

The books didn’t have a pulse. The forums gave me anxiety. What I needed was Always consult with your OB/GYN or midwife regarding

You learn when to go to the hospital, when to stay home and take a bath, and how to advocate for yourself when things don’t go according to plan. Knowledge doesn't just equal power; in this case, knowledge equals calm . Most partners want to help, but they often feel useless. They stand in the corner of the delivery room holding a water bottle, asking, "Are you okay?" (Don't ask a laboring person if they are okay.)

Then, at 3 AM during my third trimester, a wave of panic hit me. "Wait. I know how to track the baby’s size (hello, avocado week). But do I actually know how to swaddle a screaming newborn? How do I know if breastfeeding is working? What does a real contraction feel like vs. a Braxton Hicks?"

When I found out I was pregnant, I did what most of us do: I downloaded three apps, bought a stack of books, and spent way too many late nights doom-scrolling through parenting forums. I thought I was ready.

 

Hardware Installation & Configuration

Installation Steps
  

  • Check the parallel printer port setting in the bios, it should be EPP or Normal.
  • Check there are any active resident programs that use the printer port, such as TWAIN drivers. You may have to remove it.
  • Connect one end of the 25 pin SubD parallel cable  to PC printer port
  • Connect the other end  of parallel cable to 25 Pins port of the programmer
  • Connect USB power cable or AC adaptor (Note: if you are working on the EPROM programming. You may need use a AC adaptor, so that you can get Vcc 5.6V and 6.2V when doing programming)
  • The yellow power normal indicator of the programmer should light up, then the programmer power supply is normal.
  • Run the software
  • Select devices type
  • Click the Willem in toolbar to change to PCB3
  • Set the DIP switch based on the displayed pattern.

          (Note: the LPT port of PC MUST set to ECP or ECP+EPP during BIOS setup. To enter the BIOS setting mode, you need press "Del" key or "F1" key during the computer selftest, which is the moment of computer just power up.)

 

Software Version To Use

The software can be download from download.mcumall.com  

There are board hardware selection jumper on the board. When set the jumper to PCB3B, then user have to use 0.97ja and before version software.

If the board selection set to PCB3.5, PCB5.0, PCB5.5C, then the software 0.98D6 should be used.

 

          The software interface:

 

support pregnancy school

 

Hardware Check

After start the program, click test hardwar under Help menu. If the connection and power supply is normal, then appears: "Hardware present"   Otherwise check if the programmer connects well with PC, or power supply is normal.

 

Jumper Configuration

 

PCB3.5/PCB4E

support pregnancy school  
(Two PLCC32 adapter is not applied on the PCB4E)

 

PCB5.0

support pregnancy school

 

PCB5.5C

 

support pregnancy school

Note: the Vcc setting jumper only has effect when you are using AC adaptor as power source. For the USB power only 5V Vcc is available.

For the PCB5.5C, set DIP steps:

1. press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

2. press DIP Bit shift button to shift the DIP bit position to where need to set. And then press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

3. Repeat those steps till all DIP bit ae set  same as software indicated.

For PCB5.5C voltage and Special chip selection:

1. Put back the safety jumper.

2. Press the voltage button and hold for 1 second, the voltage LED should move to next. Repeat till desired voltage LED light up.

3. Press the chip selection button and hold for 1 second, the chip LED should move to next. Repeat till desired LED light up.

4. Remove the safety jumper to lock the selected voltage and chip selection

 

DIP Switch (PCB3.5, PCB5.0)

support pregnancy school 

When programming one chip,  follow the program prompt to set DIP switch . 

 

 

Self Test Function 

From bump to baby, a little preparation goes a long way.

Disclaimer: I am not a medical professional. This post is based on personal experience and general research. Always consult with your OB/GYN or midwife regarding your specific pregnancy health.

And confidence is the best thing you can pack in your hospital bag.

The books didn’t have a pulse. The forums gave me anxiety. What I needed was

You learn when to go to the hospital, when to stay home and take a bath, and how to advocate for yourself when things don’t go according to plan. Knowledge doesn't just equal power; in this case, knowledge equals calm . Most partners want to help, but they often feel useless. They stand in the corner of the delivery room holding a water bottle, asking, "Are you okay?" (Don't ask a laboring person if they are okay.)

Then, at 3 AM during my third trimester, a wave of panic hit me. "Wait. I know how to track the baby’s size (hello, avocado week). But do I actually know how to swaddle a screaming newborn? How do I know if breastfeeding is working? What does a real contraction feel like vs. a Braxton Hicks?"

When I found out I was pregnant, I did what most of us do: I downloaded three apps, bought a stack of books, and spent way too many late nights doom-scrolling through parenting forums. I thought I was ready.