Dishwasher Clogged Drain Verified -

To clean it: first, remove the bottom rack. Using a cup or a towel, bail out any standing water. Then, twist the filter counterclockwise and lift it out. What you find will likely be a horror show of congealed grease, eggshell fragments, glass shards, and a fuzzy biofilm of forgotten food. Rinse the filter thoroughly under hot tap water, using an old toothbrush to scrub the mesh. Also, reach your fingers into the filter housing (the well in the floor of the dishwasher) and remove any debris. This simple act—cleaning the filter—solves roughly 80% of all “standing water” problems.

If the filter and impeller are clear but the water remains, the blockage is in the drain hose—the corrugated plastic tube that runs from the dishwasher pump to the garbage disposal or the sink’s drainpipe. dishwasher clogged drain

To inspect it, you will need to remove the filter again. Shine a flashlight down into the opening. You are looking for the small, finned impeller. Sometimes, you can see a piece of debris lodged in its blades. Use a pair of long needle-nose pliers or a bent wire coat hanger to gently extract the blockage. Important safety note: disconnect the dishwasher from power (unplug it or flip the circuit breaker) before putting any metal tool inside the pump. To clean it: first, remove the bottom rack